John Deere 6175M Tractor


  • 175-hp John Deere FT4 PowerTech™ engine
  • 30-GPM pressure-flow compensated system
  • Choose from a range of available transmissions

Features

+ PowerTech™ PVS/PSS Stage IV engine

+ Pressure-and-flow compensated (PFC) hydraulic system

+ Cab packages and accessories

+ PowrQuad™ PLUS and AutoQuad™ PLUS transmissions

+ CommandQuad™ PLUS transmission – Available on all 6M Cab Tractors

+ Full-frame design provides superior support

+ ISOBUS and tractor-baler automation offer new baling experience



Official Test

Nebraska Test number

Engine

ManufacturerJohn Deere PowerTech? PSS (B20 Diesel Compatible)
Engine family
AspirationVariable Geometry Turbocharger second stage - air-to-air aftercooling and cooled exhaust gas recirculation
Cylinders/Displacement, cu. in. (L)6/6.8 L
6/414 cu in.
Cylinder LinersWet sleeve
Fuel tank capacity, US Gal. (L) (Open; Cab)Standard
340 L
90 U.S. gal.
Underhood mufflerYes

Performance

Advertised PTO hp (kW) @ Rated rpm106 @ 2100 kW
142 @ 2100 hp
Official PTO hp (kW) @ Rated rpm
Advertised Engine hp (kW) @ Rated speed130 @ 2100 kW
175 @ 2100 hp
Max Unballast Drwbr hp (kW) @ Eng rpm
Maximum Torque (PTO) @ rpm, lb-ft (Nm)
Max Torque Rise (80% rtd spd) @ Eng rpm
Maximum Torque Rise % (PTO) @ Eng rpm

Fuel Use, U.S. gal./hr & hp hr/gal. at:

PTO @ Rated Eng rpm
Standard PTO Speed @ Eng speed
Maximum PTO Power @ Eng rpm
Maximum Engine Power @ Eng rpm
Max Unballasted Drawbar Power @ Eng rpm
75% Load, Full Engine rpm (Unballasted)
75% Load @ Reduced rpm (Unballasted)

Transmission

Std. Transmission; Forward/Reverse16 Speed PowrQuad PLUS? Transmission 30K (Cab Only)
Opt. Transmission; Forward/Reverse20 Speed PowrQuad PLUS Transmission 40K (Cab Only); 20 Speed AutoQuad PLUS? Transmission 40K (Cab Only)
ReverserLeft-hand base
On-the-Go Shifting (Yes/No/Partial)Yes
Clutch; Wet/DryWet
CreeperYes

Power Take-Off (PTO)

StandardIndependent 1-3/8 in., 540/1000 reversible shaft
OptionalIndependent 540 rpm
PTO Speeds @ Engine rpm
PTO ActuationElectrohydraulic

Hydraulics

TypePressure & Flow Compensated (PFC) System with Load Sensing Function
Pump Rated Output, GPM (L/min.)Standard
114 L/min
30 gpm
Rated Flow @ One SCV, GPM (L/min.)
Max Output @ SCV Couplers, GPM (L/min.)
Maximum Operating Pressure, psi (kPa)20,000 kPa
2900 psi
Maximum Hydraulic Power, hp (kW)
Hitch Draft Control Load Sense TypeElectrohydraulic
Remote Control Valves AvailableUp to 3 rear mechanical or 3 with power beyond, 3 mid-mount mechanical
Hitch Category (SAE Designation)Category 2/3N
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt.Standard
4852 Advertised kg
10696 Advertised lb
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (SAE)
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (ASAE)
Sensing typeElectronic lower link
Joystick SCV controlMechanical

Final Drive

TypeInboard planetary three pinion
Differential controlsElectrohydraulic
AvailabilityFront
YesFront & Rear
Yes
Engage On-the-Go Rear Differential LockYes
Axle TypeRack and Pinion 100 length in.
Brakes, Type and ControlHydraulic wet disk

Operator Station

Rollover Protective Structure, OOSGearshift Location - Console/Floor
Transmission specific
Yes
Cab

2WD Dimensions

Wheelbase, in. (mm)2800 mm
110.2 in.
Front Tread Range, in. (mm)1610 to 2220 mm
63.3 to 87.4 in.
Rear Tread Range, in. (mm)
Minimum Rear Tread Setting, in. (mm)
Front Axle Clearance, in. (mm)
Turning Radius w/Brakes, ft (m)
Turning Radius w/o Brakes, ft (m)
Unballasted Operating Weight, lb (kg)
Approx. Ship Wgt, lb (kg) Open; Cab

MFWD Dimensions

Wheelbase, in. (mm)2800 mm
110.2 in.
Front Tread Range, in. (mm)1494 to 2206 mm
58.8 to 86.8 in.
Front Axle Clearance, in. (mm)607 mm
23.9 in.
Turning Radius w/Brakes, ft (m)7.1 m
23.5 ft
Turning Radius w/o Brakes, ft (m)7.1 m
23.5 ft
Limited Slip DifferentialYes
Unballasted Operating Weight, lb (kg)7105 kg
15664 lb
Approx. Ship Wgt, lb (kg) Open; Cab7105 kg
15664 lb

4WD Dimensions

Wheelbase, in. (mm)
Wheel Tread, Min. to Max. in. (mm)
Turning Radius w/o Brakes, ft (m)
Nebraska Test Unballasted w/Duals, lb (kg)
Unballasted Weight, lb (kg)

Standard Tires

2WD
MFWDFront
420/85R28 139A8 R1W Radial in.Rear
460/85R42 151A8 R1W Radial in.
4WD
Track widths

Miscellaneous

Country of ManufactureMannheim, Germany
Ballasting Restrictions, lb (kg)Refer to Operator's Manual
*NotesUpdated - 09/22/2016