John Deere 8245R Tractor


  • 245 Engine hp
  • John Deere PowerTech™ 9.0L PSS
  • Choice of 16-speed PowerShift, e23™ PowerShift, or Infinitely Variable Transmission (IVT™)
  • MFWD, or Independent Link Suspension (ILS™)

Features

+ Lighting packages provide 360 degrees of coverage for maximum productivity

+ ActiveCommand steering (ACS™) provides a robust and full-encompassing steering system

+ Independent-Link Suspension (ILS™) utilizes industry-leading technology

+ Hydraulic pump options to meet varying flow requirements

+ Standard CommandView™ III cab offers unsurpassed amenities

+ Tire options for 8R Series Tractors

+ Rear power take-off (PTO) options

+ ActiveSeat™ seat utilizes electrohydraulic technology with air suspension

+ Take advantage of the Generation 4 CommandCenter™, designed for efficiency



Official Test

Nebraska Test numberTBD Nebraska Test

Engine

ManufacturerJohn Deere
Engine family9.0L: EJDXL09.0301
AspirationDual turbochargers, variable geometry turbo with fixed geometry turbo in series
Cylinders/Displacement, cu. in. (L)6 cylinders/9.0 L
549 cu in.
Cylinder LinersWet
Fuel tank capacity, US Gal. (L) (Open; Cab)Standard
With G47/48 tires: 645 L
170.4 U.S. gal.
With G49 tires: 686 L
181.2 U.S. gal.
Underhood muffler

Performance

Advertised PTO hp (kW) @ Rated rpmAt @ 2100 per SAE: 149 PTO hp
200 hp
Official PTO hp (kW) @ Rated rpm
Advertised Engine hp (kW) @ Rated speedAt 2100 per 97/68EC PS: 180 kW
245 hp
Max Unballast Drwbr hp (kW) @ Eng rpm
Maximum Torque (PTO) @ rpm, lb-ft (Nm)
Max Torque Rise (80% rtd spd) @ Eng rpm
Maximum Torque Rise % (PTO) @ Eng rpm

Fuel Use, U.S. gal./hr & hp hr/gal. at:

PTO @ Rated Eng rpm
Standard PTO Speed @ Eng speed
Maximum PTO Power @ Eng rpm
Maximum Engine Power @ Eng rpm
Max Unballasted Drawbar Power @ Eng rpm
75% Load, Full Engine rpm (Unballasted)
75% Load @ Reduced rpm (Unballasted)

Transmission

Std. Transmission; Forward/Reverse16-speed PowerShift; 16/5
Opt. Transmission; Forward/Reversee23; 23/11 (42 or 50) km/h
IVT (42 or 50) km/h
ReverserLeft-hand or Right-hand (PowerShift RH only)
On-the-Go Shifting (Yes/No/Partial)Yes
Clutch; Wet/DryWet
CreeperIVT

Power Take-Off (PTO)

Standard45 mm (1.75 in.), 20 spline, 1000 rpm
Optional45 mm (1.75 in.), 20 spline, 1000 rpm and 1000E economy rpm, in-cab shiftable
45 mm (1.75 in.), 20 spline, 1000 rpm, capable of 35 mm (1.375 in.), 6/21 spline, 540/1000 rpm
PTO Speeds @ Engine rpm16-speed PowerShift: 1000 PTO rpm @ 2003 engine rpm, 1000 ECO PTO rpm @ 1596 engine rpm, and 540 PTO rpm @ 1817 engine rpm
IVT: 1000 PTO rpm @ 2000 engine rpm, 1000 ECO PTO @ 1594 engine rpm, and 540 PTO rpm @ 1814 engine rpm
e23: 1000 PTO rpm @ 1995 engine rpm, 1000 ECO PTO @ 1590 engine rpm, and 540 PTO rpm @ 1810 engine rpm
PTO ActuationElectrohydraulic

Hydraulics

TypeClosed-center, pressure/flow compensated
Pump Rated Output, GPM (L/min.)Standard
227.1 L/min
60 gpm
Optional
321 L/min
85 gpm
Rated Flow @ One SCV, GPM (L/min.)Rear: 0.5 in.
SCV: 132 L/min
35 gpm
Rear: 0.75 in.
SCV: 153 L/min
40.5 gpm
Front SCV: 96 L/min
25 gpm
Max Output @ SCV Couplers, GPM (L/min.)
Maximum Operating Pressure, psi (kPa)20,400 (+ or - 300) kPa
2958 psi
Maximum Hydraulic Power, hp (kW)
Hitch Draft Control Load Sense TypeElectronic
Remote Control Valves AvailableStandard: four
Optional: five or six
2 Front SCV option
Hitch Category (SAE Designation)Standard: Cat 3/3N
Optional: Cat 4N/3
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt.
Standard
Cat 3/3N: 6350 kg
14,000 lb
Optional
Cat 3/3N: 8391 kg
18,500 lb
Cat 4N/3: 9072 kg
20,000 lb
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (SAE)
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (ASAE)
Sensing typeElectrohydraulic
Joystick SCV controlElectrohydraulic optional

Final Drive

TypeInboard planetary
Differential controlsElectrohydraulic
AvailabilityFront
Yes
Front & Rear
Yes
Yes
Engage On-the-Go Rear Differential LockYes
Axle TypeBar axle, rack and pinion
Brakes, Type and ControlHydraulic wet disc

Operator Station

Rollover Protective Structure, OOS
Gearshift Location - Console/Floor
CommandARM
CabDoors
LH
Platform - Flat/Straddle
Flat
Seat Suspension System
Standard: air
Optional: active seat
Optional: Cab suspension with air seat

2WD Dimensions

Wheelbase, in. (mm)
Front Tread Range, in. (mm)
Rear Tread Range, in. (mm)
Minimum Rear Tread Setting, in. (mm)
Front Axle Clearance, in. (mm)
Turning Radius w/Brakes, ft (m)
Turning Radius w/o Brakes, ft (m)
Unballasted Operating Weight, lb (kg)
Approx. Ship Wgt, lb (kg) Open; CabMFWD/PST with 625-kg (1378-lb) inner weights, front weight support, Cat3 hitch with QC, 113.6 L (30 gal.) fuel, 480/80R46 rear duals, 420/90R30 fronts:
12,680 kg; 27,953 lb
ILS/IVT with 625-kg (1378-lb) inner weights,front weight support, Cat4 hitch with QC, 113.6 L (30 gal.) fuel, 480/80R50 rear duals, 420/85R34 front duals:
15,009 kg; 33,091 lb

MFWD Dimensions

Wheelbase, in. (mm)MFWD: 3080 mm
121.3 in.
ILS: 3050 mm
120.1 in.
Front Tread Range, in. (mm)1300 MFWD: 1524-2235 mm
60-88 in.
1500 MFWD/ILS: 1524-3657 mm
60-144 in.
Front Axle Clearance, in. (mm)MFWD: 686 mm
27 in.
ILS: 590 mm
23.2 in.
Turning Radius w/Brakes, ft (m)
Turning Radius w/o Brakes, ft (m)
Limited Slip DifferentialLimited slip or hydraulic lock differential available
Unballasted Operating Weight, lb (kg)
Approx. Ship Wgt, lb (kg) Open; CabMFWD/PST with: Inner weights: 625 kg
1378 lb
front weight support/Cat3 hitch with QC/Fuel 113.6 L
30 gal.
480/80R46 duals/420/90R30 fronts
12,498 kg
27,553 lb

4WD Dimensions

Wheelbase, in. (mm)
Wheel Tread, Min. to Max. in. (mm)
Turning Radius w/o Brakes, ft (m)
Nebraska Test Unballasted w/Duals, lb (kg)
Unballasted Weight, lb (kg)

Standard Tires

2WD
MFWDFront
420/90R30
Rear
480/80R46
4WD
Track widths

Miscellaneous

Country of ManufactureWaterloo, IA USA
Ballasting Restrictions, lb (kg)Refer to operator's manual
*Notes