John Deere 6155M Tractor


  • 155-hp John Deere FT4 PowerTech™ engine
  • Available in cab or open-station configuration
  • 30-GPM pressure-flow compensated system
  • Choose from a range of available transmissions

Features

+ PowerTech™ PVS/PSS Stage IV engine

+ PowrQuad™ PLUS and AutoQuad™ PLUS transmissions

+ ISOBUS and tractor-baler automation offer new baling experience

+ Full-frame design provides superior support

+ Cab packages and accessories

+ CommandQuad™ PLUS transmission – Available on all 6M Cab Tractors

+ Pressure-and-flow compensated (PFC) hydraulic system



Official Test

Nebraska Test number 

Engine

ManufacturerJohn Deere PowerTech? PSS (B20 Diesel Compatible)
Engine family 
AspirationDual Series Turbocharger w/fixed geometry first stage-variable geometry second stage - air-to-air aftercooling and cooled exhaust gas recirculation
Cylinders/Displacement, cu. in. (L)6/6.8 L
6/414 cu in.
Cylinder LinersWet sleeve
Fuel tank capacity, US Gal. (L) (Open; Cab)Standard
295 L
78 U.S. gal.
Underhood mufflerYes

Performance

Advertised PTO hp (kW) @ Rated rpm91 @ 2100 kW
123 @ 2100 hp
Official PTO hp (kW) @ Rated rpm 
Advertised Engine hp (kW) @ Rated speed116 @ 2100 kW
155 @ 2100 hp
Max Unballast Drwbr hp (kW) @ Eng rpm 
Maximum Torque (PTO) @ rpm, lb-ft (Nm) 
Max Torque Rise (80% rtd spd) @ Eng rpm 
Maximum Torque Rise % (PTO) @ Eng rpm 

Fuel Use, U.S. gal./hr & hp hr/gal. at:

PTO @ Rated Eng rpm 
Standard PTO Speed @ Eng speed 
Maximum PTO Power @ Eng rpm 
Maximum Engine Power @ Eng rpm 
Max Unballasted Drawbar Power @ Eng rpm 
75% Load, Full Engine rpm (Unballasted) 
75% Load @ Reduced rpm (Unballasted) 

Transmission

Std. Transmission; Forward/Reverse16 Speed PowrQuad Transmission 30K (OOS Only); 16 Speed PowrQuad PLUS? Transmission 30K (Cab Only)
Opt. Transmission; Forward/Reverse20 Speed PowrQuad Transmission 40K (OOS Only);16 Speed PowrQuad PLUS? Transmission 30K (Cab Only); 20 Speed PowrQuad PLUS Transmission 40K (Cab Only); 20 Speed AutoQuad PLUS? Transmission 40K (Cab Only)
ReverserLeft-hand base
On-the-Go Shifting (Yes/No/Partial)Yes
Clutch; Wet/DryWet
CreeperYes

Power Take-Off (PTO)

StandardIndependent 1-3/8 in., 540/1000 reversible shaft
OptionalIndependent 540 rpm
PTO Speeds @ Engine rpm 
PTO ActuationElectrohydraulic

Hydraulics

TypePressure & Flow Compensated (PFC) System with Load Sensing Function
Pump Rated Output, GPM (L/min.)Standard
114 L/min
30 gpm
Rated Flow @ One SCV, GPM (L/min.) 
Max Output @ SCV Couplers, GPM (L/min.) 
Maximum Operating Pressure, psi (kPa)20,000 kPa
2900 psi
Maximum Hydraulic Power, hp (kW) 
Hitch Draft Control Load Sense TypeElectrohydraulic
Remote Control Valves AvailableUp to 3 rear mechanical or 3 with power beyond, 3 mid-mount mechanical
Hitch Category (SAE Designation)Category 2/3N
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt.Standard
3719 Advertised kg
8198 Advertised lb Optional
4170 Advertised kg
9193 Advertised lb
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (SAE) 
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (ASAE) 
Sensing typeElectronic lower link
Joystick SCV controlMechanical

Final Drive

TypeInboard planetary three pinion
Differential controlsElectrohydraulic
AvailabilityFront
Yes - Front & Rear
Yes
Engage On-the-Go Rear Differential LockYes
Axle TypeFlanged axle, 8 position adjustable steel wheels - Base
Flanged axle with 2-Position Fixed Cast Wheels - Option
86 x 2550 with 2-Position Fixed Cast Wheels mm
3.385 x 100.4 with 2-Position Fixed Cast Wheels in.
Brakes, Type and ControlHydraulic wet disk

Operator Station

Rollover Protective Structure, OOSGearshift Location - Console/Floor
Transmission specific
Yes
Cab 

2WD Dimensions

Wheelbase, in. (mm)2765 mm
108.9 in.
Front Tread Range, in. (mm)1610 to 2220 mm
63.3 to 87.4 in.
Rear Tread Range, in. (mm) 
Minimum Rear Tread Setting, in. (mm) 
Front Axle Clearance, in. (mm) 
Turning Radius w/Brakes, ft (m) 
Turning Radius w/o Brakes, ft (m) 
Unballasted Operating Weight, lb (kg) 
Approx. Ship Wgt, lb (kg) Open; Cab 

MFWD Dimensions

Wheelbase, in. (mm)2765 mm
108.9 in.
Front Tread Range, in. (mm)1494 to 2206 mm
58.8 to 86.8 in.
Front Axle Clearance, in. (mm)607 mm
23.9 in.
Turning Radius w/Brakes, ft (m)7.1 m
23.5 ft
Turning Radius w/o Brakes, ft (m)7.1 m
23.5 ft
Limited Slip DifferentialYes
Unballasted Operating Weight, lb (kg)5930 kg
13073 lb
Approx. Ship Wgt, lb (kg) Open; Cab5930 kg
13073 lb

4WD Dimensions

Wheelbase, in. (mm) 
Wheel Tread, Min. to Max. in. (mm) 
Turning Radius w/o Brakes, ft (m) 
Nebraska Test Unballasted w/Duals, lb (kg) 
Unballasted Weight, lb (kg) 

Standard Tires

2WD10.00-16³10PR F2³Bias - Front in.
460/85R38³149A8³R1W³Radial - Rear in.
MFWDFront
380/85R28 133A8 R1W Radial in.Rear
460/85R38 149A8 R1W Radial in.
4WD 
Track widths 

Miscellaneous

Country of ManufactureMannheim, Germany
Ballasting Restrictions, lb (kg)Refer to Operator's Manual
*NotesUpdated - 02/27/2015